Analog Logo Keyer System

Tính năng:
- Lưu và chèn Logo hình tĩnh & động (animated logos)
- Nhiều logos có thể tuần tự key & được điều chỉnh fade độc lập
- Công nghệ 12 bit linear keyer cung cấp nhiều mức lựa chọn độ transparency cho logos
- Cung cấp full 12-bit linear fade-in và fade-out control
- 32 programmable GPI contact closures
- Download media from a standard Windows PC running Overture™ software
- EAS supports all new alert codes including child abduction emergency
- FTP file transfer and maintenance
- Keys into the composite analog video signal directly
- Fade all out capability provided on program video output
- Standard 512MB flash storage with 512MB playout cache
- Program output bypass relay protected
- Matches logo to input video ±3dB range
- Can correct video levels ±3dB
- 2 layer logo keying
- Lựa chọn chế là hình ra là Pvw/Pgm hay key/fill output modes
- Optional 1GB or 2GB internal flash storage space (không bao gồm)
- Optional redundant power supply (bao gồm)
- Optional additional removable memory 1GB or 2GB compact flash storage (không bao gồm)
- Optional rackmount or desktop remote control panels (bao gồm)
- Optional EAS crawl support for Sage and TFT Decoders (không bao gồm)
- Optional TXT for scrolling and dynamic text titling (không bao gồm)
- SDI upgrade by factory retrofit
- Up to 2GB Playout memory options  (không bao gồm)

Thông số kỹ thuật:
Composite Analog Video Input
- Standard         SMPTE 170M
- Number of Inputs         1 (bypass protected)
- Connector       BNC per IEC 61169-8 Annex A
- Impedance      75Ω (fixed)
- Return Loss     > 40dB up to 4.2MHz
Composite Analog Video Output
- Standard         Same as input
- Number of Outputs       2 Program. 1 Preview
- Connector       BNC per IEC 61169-8 Annex A
- Signal Level     1V nominal
- Impedance      75Ω
- DC Offset        0V ±0.5V
- Return Loss     > 40dB up to 4.2MHz
- Frequency Response< 0.1dB to 5.5MHz for Program
- Differential Gain           0.25% p-p
- Differential Phase         0.22 p-p
- SNR    > 65dB (black video. 100kHz to 5.0MHz)
LTC Reader
- Standard         SMPTE 12M-1
- Frame Rate     25 and 30 Fps nominal
- Connectors      3 pin female XLR type connector
- Level   0.2 to 4V p-p. balanced or unbalanced
Control
- Upgrade 232 Port         9 pin female "D". RS-232 57600 baud. 8 bits. no parity firmware upgrade
- Remote Panel Port       9 pin female "D". RS-422 9600 baud. 8 bits. no parity
- Remote control panel interface (only available on RCP or DCP versions)
- Serial Control Port        9 pin female "D". RS-232/422 8 bits. no parity. baud rate depends on protocol
- Selectable protocols     Automation. EAS Interface. temperature probe interface
- Media Transfers           RJ-45 1000Base T Ethernet. TCP/IP
General Purpose Input/Output
- Number of Inputs         16 (standard) additional 16 optional
- Number of Outputs       8 (standard) additional 8 optional
- Type   Opto isolated. active low
- Connector       Terminal block on breakout panel
Electrical
Autoranging 100-240VAC 50/60Hz. 60 Watts
Optional Remote Control Panel: 12VDC 9 Watts/ Autoranging 100-240VAC 50/60Hz power adapter provided
Safety   ETL listed
Complies with EU safety directive/EMI/RFI/Complies with FCC Part 15 Class A. EU EMC Directive