Bộ phát tín hiệu Composite và âm thanh qua cáp mạng.

Video
   Gain  Unity
   Differential phase error<1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error<1.0% at 3.58 MHz and 4.43 MHz
Video input
   Number/signal type
      MTP T CV/AV Series  1 composite video
   Connectors
      MTP T CV/AV Series  1 female BNC
      Nominal level  1 Vp-p for Y of S-video and for composite video
   Minimum/maximum levels  0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Return loss<-30 dB. DC @ 10 MHz
   DC offset (max. allowable)  100 mV
Video output
   Connectors
      MTP T CV/AV/SV Series  1 female RJ-45
Sync
   Standards  NTSC 3.58. NTSC 4.43. PAL. SECAM
Audio - audio models (A. AV. SVA models) only
   Gain
      RCA models  Unbalanced output: 0 dB (unity)
   Frequency response  20 Hz to 20 kHz. ±0.25 dB
   THD + Noise  0.03% @ 1 kHz. 0.3% @ 20 kHz at nominal level
   S/N
      RCA models  >90 dB. at maximum output (unweighted)
   Crosstalk<-80 dB @ 1 kHz. fully loaded
   Stereo channel separation  >75 dB @ 1 kHz
   CMRR  >34 dB @ 20 Hz to 20 kHz
Audio input - audio models (A. AV. SVA models) only
   Number/signal type
      MTP T AV/SV A RCA. MTP T AAP. MTP T 45 Series
        1 stereo. unbalanced
   Connectors
      MTP T AV/SV A RCA. MTP T AAP  1 pair of RCA female
   Impedance  >5.6k ohms ±5% unbalanced. >10k ohms ±5% balanced
   Nominal level  -10 dBV (0.32 Vrms)
   Maximum level  >+2.4 dBu (balanced or unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV ≈ 2 dBu
General
   Recommended cable type  CAT5/5E/6 (shielded or unshielded)
   External power supply  100 VAC to 240 VAC. 50/60 Hz. external; to 12 VDC. 2.0 A. regulated
   Power input requirements  12 VDC. 0.2 A