Fiber Optic Transmitter for HDMI, Audio, and RS-232

Optical fiber interconnection between transmitter and receiver
   Number/type   2 fiber optic
   Connectors     2 LC connectors
   Operating distance
      Singlemode             30 km (18.75 miles) with singlemode (SM) cables
Nominal peak wavelength            1310 nm for FOXBOX SM
   Data rate        4.25 Gbps
   Transmission power
      Singlemode             -5 dBm. typical
       Maximum receiver sensitivity
      Singlemode             -18 dBm. typical
       Optical loss budget
      Singlemode             13 dB. maximum
Resolution range            Up to 1920x1200 or 1080p @ 60 Hz pixel for pixel
   Formats         RGB. YCbCr. and xvYCC digital video
   EDID  Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables.
   HDCP             Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
   Standards       DVI 1.0. HDMI 1.3. HDCP 1.1. CEA-861E
Video input and loop through
   Number/signal type: 1 single link HDMI input
                            1 single link HDMI loop-through
   Connectors         2 female HDMI type A (1 for input. 1 for loop-through)
   Nominal level      0.8 Vp-p
Audio
   Gain
      Range         Adjustable. -18 dB to +10 dB
      Default        Unbalanced output: 0 dB
   Frequency response    20 Hz to 20 kHz. ±0.5 dB
   THD + Noise   0.10% @ 1 kHz at nominal level
   S/N    >80 dB at maximum output (unweighted)
   CMRR             65 dB @ 20 Hz to 20 kHz
   Audio bits per sample  18 bits per channel. 2 channels (L. R)
   Sampling rate             48 kHz
Audio input
   Number/signal type     1 unbalanced stereo or 2 unbalanced mono
   Connectors     (1) 3.5 mm mini stereo jack
   Impedance     >10k ohms unbalanced. DC coupled
   Nominal level  +4 dBu (1.23 Vrms). -10 dBV (316 mVrms)
   Maximum level            +8.9 dBV. (unbalanced) at 1% THD+N
    NOTE            0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV ≈ 2 dBu
Control/remote
   Serial control ports on each unit
      Control        1 RS-232. 2.5 mm mini stereo jack (front panel)
      Pass-through           1 RS-232. 3.5 mm captive screw connector. 5-pole (3 pins are used) (rear panel)
   Baud rate and protocol
      Control        9600 baud. 8 data bits. 1 stop bit. no parity
      Pass-through           9600 to 115.200 baud
   Serial control pin configuration             Mini stereo jack: tip = Tx. ring = Rx. sleeve = GND
Captive screw: 1 = Tx. 2 = Rx. 3 = GND
   Program control          Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
General
   Power supply  External
Input: 100-240 VAC. 50-60 Hz
Output: 12 VDC. 1 A. 12 watts
   Power consumption
      Device         5.7 watts. 12 VDC
      Device and power supply       7.2 watts. 12 VDC
   Temperature/humidity             Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%. noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%. noncondensing
   Cooling           Convection. vents on top and side panels
   Thermal dissipation
      Device         16.1 BTU/hr
      Device and power supply       21.3 BTU/hr
   Mounting
      Rack mount             Yes. with optional rack shelf
      Furniture mount       Yes. with optional under desk mounting kit
   Enclosure type            Metal
   Enclosure dimensions  1.0" H x 4.3" W x 6.0" D (quarter rack wide)
                                    (2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight            0.7 lbs (0.3 kg)
   Shipping weight          3 lbs (2 kg)
   Vibration        ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety         CE. c-UL. FDA Class 1. UL
      EMI/EMC     CE. C-tick. FCC Class A. ICES. VCCI
   MTBF             30.000 hours