Hệ thống chèn logo chuẩn SDI

Serial Digital Video Input
 - Standard: SMPTE 259M. 270Mb/s
 - Number of Inputs: 1
 - Connector: BNC per IEC 61169-8 Annex A
 - Equalization: Automatic to 200m @ 270Mb/s with Belden 1694 or equivalent cable
 - Return Loss: > 15dB up to 270Mb/s
Serial Digital Video Outputs
 - Standard: SMPTE 259M. same as input
 - Number of Outputs: 2 Program. 1 preview
 - Connectors: BNC per IEC 61169-8 Annex A
 - Signal Level: 800mV nominal
 - DC Offset: 0V ±0.5V
 - Rise and Fall Time: 900ps nominal
 - Overshoot: < 10% of amplitude
 - Wide Band Jitter: < 0.2 UI
LTC Reader
 - Standard: SMPTE 12M-1
 - Frame Rate: 25 and 30 Fps nominal
 - Connectors: 3-pin female XLR type connector
 - Level: 0.2 to 4V p-p. balanced or unbalanced
Control
 - Upgrade 232 Port: 9-pin female "D". RS-232 57600 baud. 8 bits. no parity firmware upgrade
 - Remote Panel Port: 9-pin female "D". RS-422 9600 baud. 8 bits. no parity
 - Remote control panel interface (only available on RCP or DCP versions)
 - Serial Control Port (3 standard): 9-pin female "D". RS-232/422 8 bits. no parity. baud rate depends on protocol
 - Selectable protocols: Automation. EAS Interface. temperature probe interface
 - Media Transfers: RJ-45 1000Base T Ethernet. TCP/IP
General Purpose Inputs and Outputs
 - Number of Inputs: 16 (standard) additional 16 (optional)
 - Number of Outputs: 8 (standard); additional 8 (optional)
 - Type: Opto-isolated. active low
 - Connector: Terminal block on breakout panel
Physical Dimensions
 - Electronics: 19" W x 1.75" H x 18.75" D. ~ (483mm W x 45mm H x 477mm D)
 - Rack Mount Control Panel: 19" W x 1.75" H x 4.25" D ~ (483mm W x 45mm H x 110mm D)
 - Desktop Control Panel: 7.75" W x 2.0" H x 6.5" D ~ (197mm W x 50mm H x 160mm D)