Hệ thống định tuyến tín hiệu SD/HD & chia đa màn hình cao cấp với 2 ngõ ra cho phép kết nối với 2 màn hình giám sát cùng lúc & cho mở rộng

(Model không IN lên sản phẩm & đây là 1 gói nhiều sản phẩm)
Gói thiết bị định tuyến & giám sát tín hiệu cao cấp VIP-X PKG bao gồm: Xenon 4RU 32x32 High Def. Router với single X-LINK output. có khả năng mở rộng lên đến 64x64 & nhóm theo khối 32. bộ nguồn redundant power supply. single reference module và reduadant frame controller. Hệ thống chia đa màn hình Multi-image display hardware bao gồm 1 bo mạch 7867VIPX16x2 module. single 7867VIPX-RP2 rear plate. và X-LINK 5m cable. được lắp đặt trong khung 7800FR

Control Room Routing Platform và Modular Multi-Image Display System

Giải pháp hoàn hảo cho phòng tổng khống chế:
-  The new VIP-X control room solution from Evertz®represents the best of Evertz®technology. including:
   • Advanced routing technology: Xenon & EQX
   • Advanced multi-viewer technology: MVP®& VIP™
   • Advanced user control system: MVP®server and Maestro™ software
   • Highest quality multi-image outputs: Most advanced scaling technology
- High Quality Image Reproduction: The VIP-X multi-image display modules use the latest scaling technology. Theproprietary  is Evertz®technology and is borrowed  from our industry-renownedup/down conversion products.
- The VIP-X is the complete solution for your next control room. or better yet. your facility.Offering both a complete facility routing platform and industry leading multi-imagedisplay technology in a single modular package. no control room or facility is too largeor too small.The advantage of the VIP-X is that none of the outputs from the router are wasted.

- Using the compact 4RU Xenon router as the foundation platform. with up to 643G/HD/SD inputs and up to 64 outputs for source  routing. plus connectivity to up to 12multi-image display outputs using X-LINK Technology and the modular 7867VIP-Xoutput cards.  VIP-X is very flexible and does not compromise the foundation router in any way. offering any source to be independently routed to  any router output. plus anysource to be displayed any number of times. sizes and aspect ratios on any multi-imagedisplay output.
- The modular 7867VIP-X card offers up to two DVI outputs. plus two HD-SDI outputs.and supports a wide range of display resolutions.  The DVI output can be easilyextended using the DVI-EV-EXT-PKG. which is a compact single fiber extensiontechnology. supporting all  output resolutions from the VIPX at distances of up to 500m(1.660).

Serial Video Inputs:
  Standard:3Gb/s (SMPTE 424M). and/orHD-SDI (SMPTE 292M). SD-SDI (SMPTE259M-C)
  Number of Inputs:Router platform dependent
  Connector:BNC IEC 61169-8 Annex AInput
  Impedance:75Ω
  Equalization:Automatic to 100m (Belden 1694A)
  Return Loss:5 - 1485MHz 15dB typical
  Embedded Audio:SMPTE 272M-A. SMPTE 299
Graphic inputs (RGBHV/DVI) Video Input:
  Standard:  G-LINK™(Evertz®proprietary) requires video to G-LINK™formatter
  Number of Inputs:Router platform dependent
  Connector:BNC IEC 61169-8 Annex A
  Input Resolution:640x480 (VGA) to 1600x1200 (UXGA)
  Input Impedance:75Ω
Serial Video Output:
  Standard:3Gb/s (SMPTE 424M). and/orHD-SDI (SMPTE 292M). SD-SDI (SMPTE259M-C)
  Number of Outputs:Router platform dependent
  Connector:BNC IEC 61169-8 Annex A
  Signal Level:800mV nominal
  DC Offset:0V ±0.5V
  Rise and Fall Time:200ps nominal (HD)740ps nominal (SD)
  Overshoot:< 10% of amplitude
Multi-Image Display Video Output per VIPX card:Standard:VESA (DVI-D) up to WUXGA (1920x1200)
  Number of Outputs: 2 Connector:DVI-IVideo:1V p-p RGB. 60/50 Hz refresh/  Impedance:50Ω
  Multi-Image Display Serial Video Output per VIPX card:Standard:3Gb/s (SMPTE 424M). and/orHD-SDI (SMPTE 292M). SD-SDI (SMPTE259M-C)
  Number of Outputs:2Connector:BNC IEC 61169-8 Annex A Impedance:75Ω
Genlock Input:
  Type:NTSC/PAL color blackLevel:1V p-p nominal
  Connector:  Uses 7800FR genlock BNC
General Purpose Interface I/O per VIPX card:
  Number of Inputs: 4 Number of Outputs: 2
  Type: GPI: 1 Opto-isolated. active low with internal pull-ups to +5V
  GPO:1 Relay closure to ground Input Signal:Closure to groundConnector:HD-15Input/Output Serial Port per  VIPX card:
  Number of Ports:1 -232 (pins 6.7) or 1 -422 (pins 1.2.6.7)
  Connector:HD-15Baud Rate:Up to 1Mbaud
  Format:Image Video.  TSLEthernet:
  Network Type:Fast Ethernet 100 Base-TX 1EEE 802.3U standard for 100Mbps base band CSMA/CD local area  network
  Connector:RJ-45 x2
Electrical
  VIPX card:Voltage:+12V DC Power:72W