Media Presentation Switcher

Five switchers in one enclosure:
  - 3x1 HDMI switcher
  - 2x1 DVI switcher
  - 2x1 VGA / HDTV switcher
  - 2x1 composite video switcher
  - 9x1 analog stereo audio switcher
Three selectable switching modes. including the ability to route all DVI and HDMI sources to the display using a single HDMI cable
      EDID Minder® ensures proper and reliable display of DVI and VGA signals
      HDCP compliant and HDMI 1.3 compatible
Thông số kỹ thuật:
Video - VGA
   Gain   Unity
   Bandwidth      350 MHz (-3 dB)
   Crosstalk        -50 dB @ 10 MHz. -30 dB @ 100 MHz
   Switching speed<5 ms (max.)
Video - HDMI
   Maximum data rate     6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock    225 MHz
   Resolution      Up to 1920x1200 or 1080p @ 60 Hz. 12 bit color
   Formats         RGB and YCbCr digital video
   Standards       DVI 1.0. HDMI 1.3. HDCP 1.1
Video - DVI
   Maximum data rate     4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock    165 MHz
   Resolution      Up to 1920x1200 or 1080p @ 60 Hz
   Formats         RGB and YCbCr digital video
   Standards       DVI 1.0. HDMI 1.2. HDCP 1.1
Video - composite video
   Gain   Unity
   Bandwidth      300 MHz (-3 dB)
   Crosstalk<-60 dB @ 5 MHz
   Differential phase error            1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Switching speed<20 ms
Video input
   Number/signal type
      VGA inputs   2 VGA-QXGA RGBHV. RGBS. RGsB. RsGsBs. HDTV component video (Y. R-Y. B-Y)
      DVI inputs    2 single link DVI-D (or HDMI)
      HDMI inputs             3 HDMI (or single link DVI-D)
      Composite video inputs         2 NTSC/PAL/SECAM composite video
   Connectors
      VGA inputs   2 female 15-pin HD
      DVI inputs    2 female DVI-I
      HDMI inputs             3 female HDMI type A
      Composite video inputs         2 female BNC
   Nominal level
      VGA inputs   1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
      Composite video inputs         1 Vp-p (including sync)
   Minimum/maximum levels
      VGA inputs   Analog 0.3 V to 1.5 Vp-p with no offset
      Composite video inputs         Analog 0.4 V to 2.0 Vp-p with no offset
   Impedance     75 ohms
   Horizontal frequency    15 kHz to 145 kHz
   Vertical frequency       30 Hz to 170 Hz
   Return loss
      VGA inputs<-40 dB @ 5 MHz
      Composite video inputs<-40 dB. 0 to 10 MHz
Video output
   Number/signal type
      VGA outputs             1 VGA-QXGA RGBHV. RGBS. RGsB. RsGsBs. HDTV component video (Y. R-Y. B-Y)
      DVI outputs  1 single link DVI-D (or HDMI)
      HDMI outputs           1 HDMI (or single link DVI-D)
      Composite video outputs       1 composite video
   Connectors
      VGA outputs             1 female 15-pin HD
      DVI outputs  1 female DVI-I
      HDMI outputs           1 female HDMI type A
      Composite video outputs       1 female BNC
   Nominal level
      VGA outputs             1.0 Vp-p for Y of component video
      0.7 Vp-p for RGB and for R-Y and B-Y of component video
      Composite video outputs       1.0 Vp-p (including sync)
   Minimum/maximum levels
      VGA outputs             Analog. 0.3 V to 1.5 Vp-p
      Composite video outputs       Analog. 0.4 V to 2.0 Vp-p
   Impedance     75 ohms
   Return loss (VGA output) <-40 dB @ 5 MHz
   DC offset (max. allowable. VGA output)             ±5 mV with input at 0 offset
   Peripheral device power           1.25 watts. 5 VDC per output (HDMI and DVI outputs only)
Sync  - VGA and composite video groups
   Input type (VGA group)            RGBHV. RGBS. RGsB. RsGsBs. bi-level and tri-level sync
   Output type (VGA group)          RGBHV. RGBS. RGsB. RsGsBs
Tri-level sync on Y. R-Y. B-Y channels for 720p. 1080i. or 1080p component video
Bi-level sync on Y channel for all other component video rates
   Standards (composite video)    NTSC 3.58. NTSC 4.43. PAL. SECAM
   Input level      1.9 V to 5.0 Vp-p
   Output level    TTL: 5.0 Vp-p (unterminated) for RGBHV. RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync
   Input impedance         510 ohms
   Output impedance       75 ohms
   Max. input voltage       5.0 Vp-p
   Max. propagation delay            30 ns
   Max. rise/fall time       4.2 ns
   Polarity           Positive or negative (follows input)
Audio - individual audio groups  (VGA. DVI. HDMI. composite video)
   Gain   Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response    20 Hz to 20 kHz. ±0.5 dB
   THD + Noise   0.01% @ 1 kHz at nominal level
   S/N    >90 dB at maximum output (unweighted)
   Crosstalk<-72 dB @ 1 kHz or below. <-45 dB @ 20 kHz
   Stereo channel separation        >80 dB @ 20 Hz to 20 kHz
Audio input - individual audio groups  (VGA. DVI. HDMI. composite video)
   Number/signal type
      HDMI inputs             3 stereo. unbalanced
      All other inputs         2 stereo. unbalanced. per each (VGA. DVI. composite video) input group
   Connectors
      Composite video inputs         2 pairs of female RCA connectors
      HDMI inputs             3 female 3.5 mm stereo mini jacks; tip (L). ring (R). sleeve (GND)
      All other inputs         2 female 3.5 mm stereo mini jacks per input group; tip (L). ring (R). sleeve (GND)
   Impedance     >10k ohms unbalanced. DC coupled
   Nominal level  -10 dBV (316 mVrms)
   Maximum level            +8.2 dBV. (unbalanced) at 1% THD+N
   Input gain adjustment  -24 dB to +18 dB. adjustable per input
    NOTE            0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV ≈ 2 dBu
Audio output - individual audio groups  (VGA. DVI. HDMI. composite video)
   Number/signal type     1 stereo. unbalanced. per each group
   Connectors
      Composite video output         1 pair of female RCA connectors
      All other outputs       1 female 3.5 mm stereo mini jack per group (VGA. DVI. HDMI); tip (L). ring (R). sleeve (GND)
   Impedance     50 ohms unbalanced
   Gain error       ±0.1 dB channel to channel
   Nominal level  -10 dBV (316 mVrms)
   Maximum level (Hi-Z)   >+8.2 dBV unbalanced at 1% THD+N
   Maximum level (600 ohm)        >7.1 dBm unbalanced at 1% THD+N
    NOTE            The MPS does not de-embed digital audio from the HDMI inputs.
Audio  - program audio
   Gain
      When program volume is at default:  -15 dB for unbalanced output. -9 dB for balanced output
      When program volume is at maximum:          0 dB for unbalanced output. +6 dB for balanced output
   Program volume range            0 to 100 (-70 dB to +12 dB)
   Frequency response    20 Hz to 20 kHz. ±0.5 dB
   THD + Noise   0.08% @ 1 kHz. 0.1% @ 20 kHz at nominal level
   S/N    >90 dB at maximum output (unweighted)
   Crosstalk        -105 dB @ 1 kHz. -91 dB @ 20 kHz (when all inputs are terminated)
-93 dB @ 1 kHz. -70 dB @ 20 kHz (when all inputs are unterminated)
   Stereo channel separation        100 dB @ 20 Hz. 80 dB @ 1 kHz. >55 dB @ 20 kHz
Audio output  - program audio
   Number/signal type     1 stereo. balanced/unbalanced
   Connector       (1) 3.5 mm captive screw connector. 5-pole
   Impedance     50 ohms unbalanced. 100 ohms balanced
   Gain error       ±0.1 dB channel to channel
   Nominal level when the main volume is set to default      -2 dBu (632 mVrms) balanced output
   Maximum level (Hi-Z)   >16.5 dBu balanced. >8.2 dBV unbalanced at 1% THD+N
   Maximum level (600 ohm)        >10.4 dBm balanced. >7.1 dBm unbalanced at 1% THD+N
   Talk-over (ducking) response time (typical)
      Attack time  Instant
      Release delay          5 seconds
      Release time            1 second
   Ducking level   0 dB to 30 dB. adjustable; default = +6 dB
Microphone input
   Number/signal type     1 mono balanced/unbalanced
   Connector       (1) 3.5 mm captive screw connector. 3-pole
   Impedance     >2.3k ohms unbalanced. >10k ohms balanced
   Nominal level  -60 dBV (1 mV) when mic volume is set to 0 dB gain
   Minimum level             -72 dBV (0.25 mVrms) when mic volume is set to +12 dB gain
   Maximum level            -16 dBV (158 mVrms) at 1% THD+N when mic volume is set to -20 dB gain
   Microphone volume range        -66 dB to +12 dB
   Microphone DC power  +48 VDC phantom power. can be turned on or off
Control/remote - switcher
   Serial control port       1 RS-232. 3.5 mm captive screw connector. 3-pole. rear panel
   Baud rate and protocol             9600 baud. 8 data bits. 1 stop bit. no parity
   Serial control pin configuration             2 = Tx. 3 = Rx. 5 = GND
   USB control ports        1 front panel female mini USB B
   USB standards            USB 2.0. low speed
   Program control          Extron control program for Windows®
Extron Simple Instruction Set (SIS™)
General
   Power supply  Internal
Input: 100-240 VAC. 50-60 Hz
   Temperature/humidity             Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%. noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%. noncondensing
   Cooling           Convection. no vents
   Thermal dissipation. full load    32.6 BTU/hr
   Mounting
      Rack mount             Yes. with included brackets
      Furniture mount       Yes. with optional under-desk mounting kit
   Enclosure type            Metal
   Enclosure dimensions  1.75" H x 17.4" W x 8.5" D (1U high. full rack wide)
4.4 cm H x 43.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes brackets.)
   Product weight            7.0 lbs (3.2 kg)
   Shipping weight          10 lbs (5 kg)
   Vibration        ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety         CE. c-UL. UL
      EMI/EMC     CE. C-tick. ICES. FCC Class A. VCCI
      Environmental          Complies with the appropriate requirements of RoHS. WEEE