Thiết bị chuyển đổi tín hiệu composite hình & tiếng 8 đường vào / 4 đường ra

 - Inputs: Video on female BNC connectors; audio on captive screw connectors
 - Outputs: Video on female BNC connectors; audio on captive screw connectors
 - 150 MHz (-3 dB) video bandwidth. fully loaded — Ensures switching and distribution of video signals without degradation. MAV Series matrix switchers provide a minimum 150 MHz (-3 dB) of video bandwidth at full performance capability when one input drives all outputs.
 - Video genlock — Allows for vertical interval switching and enables smooth. seamless transitions when switching between synchronous video sources.
 - Compatible with NTSC 3.58. NTSC 4.42. PAL. and SECAM video — Provides for worldwide compatibility.
 - Switches both balanced and unbalanced stereo audio — Accepts both signals on captive screw connectors.
 - Audio input gain and attenuation — Balances all audio inputs so there is no noticeable difference between volume levels. Adjustments can be made directly from the front panel or through RS-232 control. input by input.
 - Audio breakaway — Provides the capability to break away an audio signal from its corresponding video signal. Switching can be done via the front panel or RS-232 remote.
 - QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete button for each input and output. allowing for simple. intuitive operation.
 - View I/O mode — Easily view which inputs and outputs are actively connected.
 - Global presets — Frequently used I/O configurations may be saved and recalled either from the QuickSwitch Front Panel Controller or RS-232 serial control. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.
 - RS-232 control port — Using serial commands. the MAV Series can be controlled and configured via the included Windows-based control software. or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol. a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 port also makes it easy to install firmware updates.
 - Optional IR 501 remote control
 - Control software — Provides a graphical. drag-and-drop interface for I/O configuration and other customization functions via RS-232 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
 - Optional remote control — Optional X/Y control panels. bus control panels. and keypads provide the flexibility to control a MAV Series matrix switcher from a remote location.
 - Front panel security lockout — Prevents unauthorized use when the matrix switcher is installed in an unsecured environment where easy access is not desirable. In lockout mode. a special button combination is required to operate the front panel.
 - 1U. rack-mountable metal enclosure
 - Internal universal power supply — The 100-240 VAC. 50/60 Hz. international power supply provides worldwide power compatibility.