Bộ thu không dây IFB - UHF Belt-Pack Receiver

Frequency control: Crystal Controlled PLL
Sensitivity: 1 uv (20 dB SINAD)
Signal/Noise ratio: 95 dB A-weighted
Squelch quieting: 90 dB
AM rejection: 50 dB. 10 uV to 100 mV
Modulation acceptance: ±20 kHz
Spurious rejection: Greater than 70 dB
Third order intercept: 0 dBm
Frequency response: 100 Hz to 10 kHz. (±1db)
Pilot tone: 29.997 kHz. 2 kHz deviation
 (fixed crystal controlled)
Audio output: 1V RMS into 50 Ohms minimum
Antenna: Headphone cable
Min. headphone impedance: 25.6 Ohms
Programmable memory: Switches set default frequency; up to five additional
 frequencies can be stored in memory
Front panel controls: Single knob controls Audio Output Level. Power On.
 Programming and Scan Frequency Selection
Indicators: Multi-color LED indicator for power on and battery
 status. Blinks to indicate channel number and
 during scanning.
Battery Requirements: 9V alkaline battery lasts about 8 hours
 9V lithium battery lasts about 20 hours
Power consumption: 60 mA
Weight: 7.3 oz with battery
Size: 3.6 x 2.4 x 0.8 inches (housing only)